Epoxy & Quartz Flooring | Empire, CO

The Concrete Doctor Team

✨ EPOXY & QUARTZ FLOORING

Epoxy & Quartz Flooring in Empire, CO

Epoxy and quartz broadcast flooring systems give Empire homes and small commercial spaces a finished, high-performance surface that stands up to the genuine abuse mountain Colorado interiors endure. Concrete Doctor has been installing these systems throughout Clear Creek County since the 1990s, and our familiarity with the specific temperature, moisture, and UV conditions at Empire's 8,600-foot elevation shapes every product decision we make on these projects.

Westcoat Systems PartnerFamily-Owned Since 199430+ Years ExperienceFree Estimates

Interior slabs in Empire properties — whether a home's main floor, a workshop, or a utility space — are subject to moisture migration patterns that differ from low-elevation construction. The combination of snowmelt-saturated ground conditions through late spring and the thermal mass behavior of mountain slabs (they stay cold longer, even in heated spaces) creates conditions where vapor drive through the slab can undermine a coating system that wasn't properly specified for high-altitude mountain concrete. Quartz broadcast systems are particularly well-suited to Empire's interior demands because the silica quartz aggregate embedded in the epoxy matrix adds surface texture, builds film thickness, and creates a surface that handles the tracked-in moisture and grit that mountain properties accumulate from October through May. The aesthetic versatility of quartz systems — dozens of color and grain-size combinations available through our Westcoat partnership — means functional performance doesn't require sacrificing the look of a finished interior space.

Our Epoxy & Quartz Flooring Approach

Every epoxy and quartz flooring project we undertake in Empire starts with mechanical surface preparation. Diamond grinding establishes a concrete surface profile that allows the coating system to bond at the pore level — without this step, even the best coating chemistry will eventually delaminate. Grinding also removes any surface contamination and reveals subsurface conditions: soft spots, delamination, previous coatings, or moisture-related damage that need to be addressed before new product goes down. Our standard quartz flooring architecture layers an epoxy primer into the prepared slab, followed by a body coat with quartz aggregate broadcast to refusal, then a clear polyurethane or polyaspartic topcoat that seals the quartz and provides the final surface hardness. The polyaspartic topcoat option is especially relevant for Empire interiors — its faster cure time reduces the window during which the surface is vulnerable to temperature-driven cure issues, and its UV stability prevents yellowing in spaces with natural light exposure. We work closely with clients on color and texture selection; the final system should reflect both how the space is used and how it needs to look.

Moisture Management Before Coating at High Altitude

Slab moisture is the most common cause of premature coating failure in mountain settings, and Empire's climate makes this a particularly important pre-installation consideration. Ground saturation from snowmelt stays elevated well into June at this elevation, and slab temperatures remain low enough in spring and fall that even a well-dried-out garage or interior space can have measurable vapor emission at the slab surface. We perform moisture testing as a standard part of the pre-installation process. If vapor emission rates exceed safe thresholds for the coating system being applied, we use moisture-mitigating primer products that create a vapor barrier within the coating architecture. This adds a step to the process, but it's the difference between a coating that bonds correctly and one that bubbles or delaminates within its first full seasonal cycle. Getting this right in Empire's mountain climate requires experience with high-altitude slab behavior — not just a reading from a moisture meter and a go-ahead.

Quartz Broadcast vs. Solid-Color Epoxy for Empire Interiors

The choice between a quartz broadcast system and a solid-color epoxy depends primarily on how the space is used and what surface texture is needed. Quartz broadcast systems — where colored silica aggregate is distributed into the wet coating — produce a multi-tonal, textured surface that excels in spaces with foot traffic, moisture exposure, or the need to conceal wear over time. Mountain homes in Empire often have workshops, mudrooms, mechanical rooms, or utility areas that see heavy use; the quartz system's inherent texture also reduces slip risk on damp surfaces. Solid-color epoxy or epoxy-urethane systems work well in spaces where a seamless, easy-to-clean surface is the priority — think a finished basement used as a home office or gym. These systems can be modified with anti-slip additives when needed. In either case, the polyaspartic topcoat option extends UV resistance and cure-temperature tolerance, which matters at Empire's elevation even for interior spaces that receive reflected light. We walk through these options during every estimate visit, matching the system architecture to how the space will actually be used rather than defaulting to a single product for every project.

Serving Empire, CO Since 1994

Serving Empire from our Lakewood base since 1994, Concrete Doctor brings mountain-specific flooring expertise to every project in Clear Creek County. We know how high-altitude concrete behaves differently from plains or metro slabs, and our product specifications reflect that knowledge. If you're ready to transform a worn, dusty interior concrete floor into a durable, finished surface, call (303) 988-2558 or request a free on-site estimate — we'll assess your slab, discuss system options, and give you a straight answer on timeline and cost.

Frequently Asked Questions

It depends on the specific space and how the system is specified. For spaces that see significant temperature swings or extended cold periods, we select coating systems with the thermal flexibility and cold-temperature cure properties to handle those conditions. A properly specified polyaspartic or hybrid system installed on a well-prepared slab will perform well in mountain spaces that aren't heated year-round — but the product selection has to match the environment, which is why the assessment visit matters.

Most residential interior floor projects in Empire complete in two to three days — one day for grinding and surface preparation, one day for coating application, and a cure period before the space is returned to use. Larger or more complex spaces, or those requiring moisture mitigation work, may take an additional day. We give you a specific timeline during the estimate based on square footage, slab condition, and the system being installed.

Not reliably, no. Existing coatings that are delaminating, peeling, or adhesion-compromised need to be removed before a new system goes down — grinding typically takes care of this, but it has to happen. Applying a new coating over a failing one traps the failure mode and the new coating will inherit the same delamination problem. We identify this during the estimate and price out what removal requires.

Through our Westcoat partnership we have access to a wide range of quartz grain sizes and color blends — from natural stone-tone earth palettes to more contemporary blended combinations. We bring samples to estimate visits so you can see actual material in the context of your space, under its natural light conditions. The topcoat sheen level (matte, satin, or gloss) is also a client-chosen variable that doesn't affect performance.

Last updated: June 2026

Need Epoxy & Quartz Flooring in Empire, CO?

Get a free on-site estimate from Concrete Doctor — repair first, replacement only when necessary.

Schedule a Free Estimate →Call (303) 988-2558

Repair first. Replacement only when necessary.