Epoxy & Quartz Flooring in Georgetown, CO

Georgetown's mountain elevation means interior spaces that might seem protected — garages, mud rooms, finished basements — still experience significant temperature swings. Garages in particular cycle between outdoor conditions and heated interior air, creating condensation and moisture vapor pressure beneath slabs. A quartz broadcast epoxy system that isn't preceded by proper moisture testing and surface prep will delaminate in these conditions, leaving bubbles and peeling within a season or two. We've seen the failures left behind by coatings applied without addressing the substrate first. The town's historic character also means many Georgetown floors are old concrete — mix designs from decades ago with higher water-to-cement ratios, softer surfaces, and micro-porosity that requires careful preparation before any coating bonds properly. Our process starts with aggressive diamond grinding or shot blasting to open the surface, remove contamination, and create the mechanical profile that makes a quartz system stick for the long term rather than just the first winter.

We install Westcoat-partnered epoxy and quartz systems, beginning every project with a thorough substrate assessment: checking for moisture vapor emission, testing surface hardness, identifying previous sealers or coatings that must be stripped, and documenting any crack or joint issues that need addressing before coating. No cosmetic coating survives on a compromised substrate — that's where we start. The quartz broadcast itself is applied over a pigmented epoxy base, with broadcast aggregate creating both texture and additional thickness. A UV-stable polyaspartic or urethane topcoat locks in the quartz, provides chemical resistance to mag chloride and oil, and delivers the semi-gloss or satin finish that makes the floor easy to clean. For Georgetown installations where temperature fluctuations stress coatings, we select flexible topcoat formulations that tolerate thermal movement better than standard commercial-grade finishes.

Georgetown garages live a hard life. Vehicles track in road brine and mag chloride from I-70, temperatures drop well below zero on winter nights, and concrete slabs that were never sealed absorb road chemicals season after season. A quality quartz broadcast system addresses all of these stresses in a single installation: the epoxy base seals the concrete against further chemical penetration, the quartz layer adds abrasion resistance, and a quality topcoat sheds the brine and dirt that would otherwise keep attacking the surface. We see many Georgetown garage floors where previous owners applied roll-on big-box store coatings that peeled after a season. These fail because they don't address moisture, don't mechanically prepare the concrete, and use thin single-component products that can't bond under real-world conditions. Our process takes longer and costs more than a weekend DIY kit — but the finished floor holds for years, not months.

Georgetown's steep lots and mountain setting mean exterior-adjacent indoor surfaces see tracked-in snow, ice melt water, and general winter wet. A smooth epoxy surface becomes a slip hazard under these conditions. The quartz broadcast aggregate in our systems creates a textured surface that provides grip even when wet — a meaningful safety feature for garages, utility areas, and commercial entryways in a mountain community where wet floors are a seasonal constant. We calibrate aggregate density and topcoat texture to the specific space: heavier texture for a working garage or commercial floor, lighter broadcast for a finished basement or interior utility room where comfort underfoot also matters. The goal is a floor that performs safely without feeling rough or difficult to clean.