Epoxy & Quartz Flooring in Hillrose, CO

Our epoxy and quartz flooring process begins with mechanical surface preparation — diamond grinding or shot blasting to open the concrete profile and remove any contaminants, existing coatings, or laitance that would prevent adhesion. This step is not optional; it is what separates a coating that lasts a decade from one that peels within a year. Any cracks or spalled areas are repaired prior to coating so the finished surface is uniform and structurally sound. We offer a range of systems through our Westcoat partnership, from solid-color epoxy base coats with a polyaspartic clear finish to full broadcast quartz systems in multiple color blends. The quartz broadcast option is particularly popular for working floors because the embedded aggregate provides natural slip resistance, conceals minor surface texture, and hides light traffic marks between cleanings. For spaces with heavy chemical exposure, we can specify chemical-resistant formulations that exceed standard epoxy performance. Every job concludes with a UV-stable topcoat to lock in the color and protect the surface from the high-altitude Colorado sun.

A solid-color epoxy floor looks great in a showroom photo, but in a working garage or equipment shop it shows every scuff, tire mark, and dirty footprint immediately. Quartz broadcast systems blend colored quartz aggregate into the epoxy base, creating a textured surface that hides everyday traffic marks far better than a smooth finish. The texture also provides meaningful slip resistance when the floor gets wet — an important safety consideration in any working environment. The aggregate layer also adds thickness to the total coating system, which improves its ability to bridge hairline cracks and minor surface irregularities. For older slabs with slight surface roughness or micro-cracking, a full broadcast quartz system is often the better choice over a thin-build epoxy because it delivers a more uniform final appearance. It also cleans as easily as smooth epoxy — a quick sweep and damp mop handles the vast majority of maintenance. For Hillrose shops and garages where the floor may see occasional exposure to sunlight, quartz systems with polyaspartic topcoats are the right call. Standard clear epoxy topcoats will yellow noticeably within a season or two under UV load — a UV-stable polyaspartic finish prevents that and keeps the color accurate for the long term.

Many of the concrete slabs we encounter in older Hillrose properties were poured 25 to 40 years ago with minimal surface finish quality. Over time, the paste layer has carbonated, traffic has polished the surface, and various contaminants have soaked in. None of these conditions prevent a good coating — but they all require proper mechanical preparation before any coating material is applied. Our crews use diamond grinding or shot blasting equipment to open the concrete surface to an appropriate profile (typically CSP 2-3 for epoxy systems). This step removes the carbonated paste layer, eliminates contaminants that would cause delamination, and creates the mechanical tooth the epoxy needs to bond properly. We do not use acid etching as a primary prep method — it is inconsistent and leaves residual chemistry in the slab that can interfere with adhesion. Once the surface is prepared, any open cracks are filled with a compatible repair compound and allowed to cure before coating begins. Ignoring cracks during prep does not make them go away — it buries them under the coating, where they will telegraph through the finish within a season. Doing this work correctly the first time is the only way to stand behind the final product.

Concrete Doctor has served Colorado from our Lakewood base for more than thirty years, and we make regular trips east along the Front Range corridor to serve Morgan County clients including Hillrose. We know the soils, the climate, and the specific wear patterns that affect floors in this part of the state — that local knowledge shapes how we specify and prep every project. If you are ready to stop tolerating a dusty, stained concrete floor, call us at (303) 988-2558 or reach out online for a free on-site estimate. We will come to you, evaluate the slab, and give you a straight answer on the best system for your space.