🎨 METALLIC & FLAKE FLOORS

Metallic & Flake Floors in Nederland, CO

Metallic and color flake epoxy floors have become one of the most popular requests we get from homeowners who want a floor that's both functional and genuinely attractive. In Nederland, where homes range from rustic mountain cabins to contemporary new builds, these systems offer a design range that suits everything from a gear room to a finished living space. The key in a mountain environment is ensuring the topcoat system is UV-stable — which ours are — so the floor stays looking as good in year ten as it did on installation day.

Westcoat Systems PartnerFamily-Owned Since 199430+ Years ExperienceFree Estimates
Nederland homes often have a certain aesthetic — natural materials, warm tones, a connection to the mountain environment. Metallic epoxy systems with their swirling, dimensional appearance can complement that look in a way that plain gray or solid-color concrete cannot. Earth-toned metallics — bronzes, coppers, charcoals — work particularly well in spaces that feature wood, stone, or reclaimed materials. Color flake systems are a practical choice for Nederland garages and utility spaces where aesthetics matter but so does functionality. The flake broadcast hides surface imperfections in older slabs, and the multi-color chips camouflage day-to-day scuffs, tire marks, and dirt far better than solid-color coatings. In a mountain garage where snowy boots, outdoor gear, and vehicle traffic are daily realities, this camouflage effect is a real maintenance advantage.

Our Metallic & Flake Floors Approach

Metallic epoxy systems use metallic pigments suspended in a high-solid epoxy base that creates a three-dimensional, lustrous appearance when properly applied and topcoated. The application technique involves manipulation of the wet epoxy to create swirling, flowing, or layered patterns — no two metallic floors look exactly alike. We finish metallic systems with a Westcoat UV-stable polyaspartic clear coat that protects the appearance under Colorado's intense high-altitude sun. Without UV protection, metallic epoxy will yellow and dull within a season or two. Color flake systems use a vinyl chip broadcast into a wet epoxy base, then sealed with a polyaspartic topcoat that locks the flakes in place and provides the wear surface. The flake density and color palette are fully customizable. For Nederland properties, we often suggest warm neutrals and earth tones rather than the standard gray chip blends — they tend to suit mountain home interiors better and hold their appeal over time.

Design Customization for Mountain Home Aesthetics

The design range within metallic and flake systems is broader than most homeowners realize. For metallics, the pigment palette runs from warm golds, bronzes, and coppers through cool silvers, blues, and charcoals, and effects can range from a marbled, single-color swirl to multi-layer blends that create depth and complexity. The manipulation technique during application determines the final look, and our installers are experienced in executing a specific result rather than just letting the product do what it will. For flake systems, custom color blends are available — you're not limited to the standard six-color chip bags from a hardware store. We work with Westcoat's commercial chip palettes to create blends that complement your home's existing finishes. Showing us a photo of the space and the adjacent flooring, wall colors, or cabinetry helps us recommend options that will look intentional and cohesive.

Why UV-Stable Topcoats Matter in Nederland

A metallic floor installed without a UV-stable topcoat is a floor on a timer. Nederland's altitude amplifies UV intensity compared to Denver — the same sun exposure that merely fades a coating at 5,400 feet can yellow and chalk a non-stabilized system within a single season at 8,200 feet. We've seen metallic floors from other installers that looked great on day one and were dull and yellowed within eighteen months because the wrong topcoat was used. Westcoat polyaspartic topcoats are specifically formulated with UV inhibitors that maintain clarity and color fidelity in high-exposure environments. This isn't a marketing claim — it's a chemistry decision that matters for Nederland installations. Every metallic and flake floor we install in mountain Colorado gets a UV-stable polyaspartic finish as standard.

Serving Nederland, CO Since 1994

We install metallic and flake systems throughout Boulder County and the Front Range from our Lakewood base. Nederland is well within our regular service area, and we enjoy working on mountain home projects where the design conversation matters. If you want a floor that does more than just sit there, give us a call at (303) 988-2558 — we're happy to discuss options and bring samples so you can see the color and finish choices before committing.

Frequently Asked Questions

Metallic epoxy with a polyaspartic topcoat is highly durable — it handles vehicle traffic, snow melt, and the road chemicals that track in off Colorado mountain roads. The topcoat is the wear surface, and polyaspartic is harder and more chemical-resistant than standard epoxy. The metallic layer beneath is protected and doesn't come into contact with traffic or chemicals.
Yes. We bring physical samples to estimates and can show you photos of previous installations. For metallic floors especially, seeing a sample in person gives a much better sense of the color and depth than photos on a screen. We encourage homeowners to take time with the color selection — it's a decision that's worth getting right.
Absolutely — these systems are increasingly used in living rooms, kitchens, and recreation rooms in mountain homes. The key is selecting a finish and chip size that reads as interior decor rather than industrial. Smaller flake sizes and curated metallic tones work well in finished living spaces. We'll help you calibrate the look for the specific room.
Routine maintenance is easy: sweep or dust mop regularly, damp mop with a pH-neutral cleaner as needed. Avoid abrasive scrubbers or acidic cleaners. The sealed, seamless surface doesn't harbor dirt and cleans up quickly. Touch-up of the topcoat after several years of heavy use is possible without refinishing the entire floor.

Related Pages

Metallic & Flake Floors in ColoradoEpoxy & Quartz Flooring in Nederland, COGarage Floor Coatings in Nederland, COBasement Floor Coatings in Nederland, COCommercial & Warehouse Epoxy Flooring in Nederland, COCrack & Joint Repair in Nederland, CO

Last updated: June 2026

Need Metallic & Flake Floors in Nederland, CO?

Get a free on-site estimate from Concrete Doctor — repair first, replacement only when necessary.

Schedule a Free Estimate →Call (303) 988-2558

Repair first. Replacement only when necessary.