Metallic & Flake Epoxy Floors in Shawnee, CO

Metallic epoxy floors are applied using pigmented epoxy combined with metallic powder that's worked with tools during the wet phase to create the flowing, three-dimensional patterns that define the look. Each installation is unique because the metallic movement can't be perfectly controlled — the result is an organic floor pattern that doesn't repeat. Concrete Doctor uses Westcoat metallic epoxy systems that include UV-stable topcoats specifically selected for Colorado's high-altitude sun exposure, ensuring the metallic finish retains its depth and sheen without yellowing under the intensity that Shawnee's elevation delivers. Vinyl chip and full-broadcast flake systems involve dispersing colored vinyl chips into a wet base coat at varying densities — from a light scatter that shows some base color to a full broadcast where chips are thrown to rejection (coverage until no more will adhere). The chips are then sealed with a high-build clear topcoat that locks them in place and provides the protective layer. The chip texture provides inherent slip resistance that's valuable in spaces where wet boots and gear are routine. Color selection is broad enough that the floor can complement any interior color scheme.

Decorative floor finishes that look spectacular in a catalog photo can disappoint significantly when installed in high-UV environments without proper topcoat specification. Standard epoxy formulations are not UV-stable — they yellow visibly within one season of UV exposure, turning a carefully chosen metallic or chip floor a muddy amber color. At Shawnee's near-7,000-foot elevation, that yellowing happens faster and more severely than at lower elevations because UV intensity increases with altitude. Concrete Doctor exclusively uses topcoat systems rated for UV stability in outdoor and high-UV indoor environments. For metallic floors near windows or in spaces with significant natural light, a polyaspartic or aliphatic polyurethane topcoat is specified rather than standard aromatic epoxy. This is not an upgrade we charge extra for — it's the baseline specification for decorative work in Colorado's mountain zone. You should ask any contractor proposing decorative floors in your Shawnee property specifically about UV stability in their topcoat product.

Full-broadcast flake systems — where colored vinyl chips are thrown until the surface is completely covered — are among the most popular decorative floor options for mountain garages because they deliver a finished, professional appearance without requiring the precise technique of metallic work. The dense chip coverage hides minor surface imperfections, provides excellent slip resistance from the textured surface, and offers a color depth that monochromatic solid-color floors can't match. For Shawnee garage floors that deal with tracked-in road grit, gear storage, and intermittent use during snowy seasons, the full-flake system is also practical. The textured surface hides minor dirt and scuffs better than a smooth high-gloss floor, and the sealed topcoat allows the floor to be cleaned efficiently when the cabin is being opened up at the start of the season. Color blends ranging from earth tones that echo the canyon landscape to bold contrasting combinations are available, and we can show physical sample chips so you can see exactly what you're choosing.

Decorative floor work in Shawnee and the Park County mountain corridor is a specialty that requires both the technical skill to prepare and install correctly and the product knowledge to specify UV-stable systems that won't disappoint at altitude. Concrete Doctor has been doing this work across the Front Range for over 30 years and we've seen which decorative systems hold up in Colorado's mountain zone and which ones don't. For a free consultation on metallic or flake floor options for your Shawnee property, call us at (303) 988-2558.