Mudjacking in Sheridan, CO: Lift, Don't Replace

Sheridan sits low in the South Platte River corridor, and that proximity to the river shapes the ground under much of the city. Soils here carry more moisture variability than the drier clay benches farther from the water, and older sub-base material under Sheridan's residential streets and sidewalks wasn't always compacted to the standards used in later decades. Combined with the age of the housing stock, much of it built well before modern drainage codes, water tends to pool near foundations and along sidewalk edges rather than routing away cleanly. Sheridan is also a compact city, with narrow lots and sidewalks that sit close to both the street and the house. That tight footprint means a settling sidewalk panel or driveway apron is rarely an isolated problem; it usually affects the adjoining panel too, since they were poured against each other and move somewhat together as the ground beneath them shifts.

A city sidewalk is public right-of-way in most jurisdictions, and property owners can be responsible for maintaining the panel in front of their home or business, including any panel that's dropped enough to create a trip lip. In a compact city like Sheridan, where sidewalks run close to front doors and small commercial storefronts, a settled panel sees real daily foot traffic. Lifting the panel back level closes the height difference at the joint, which is what actually causes trips, rather than just smoothing the surface cosmetically. It's a faster fix than coordinating a full panel replacement through a municipal permitting process, and it resolves the liability the same day.

Sheridan's commercial stretch along South Santa Fe Drive includes a mix of smaller storefronts, auto-related businesses, and service shops, many with modest parking areas and apron slabs that see daily vehicle turning traffic. A settled apron near a driveway entrance takes repeated impact from vehicles rocking over the low edge, which can accelerate cracking if it's not addressed. We schedule commercial lifting work to minimize disruption to a small business's operating hours, and most apron or lot-section lifts are finished well within a single business day.